Utsav succesfully defended his master’s thesis on Human Robot Interaction through Knowledge and Machine Learning approaches. He has developed an flexible, modular, expandable environment based on LabVIEW and myRIO for his work. This environment will be employed for continued research in HRI modalities.
Congratulations and we look forward to your continued successes!
Compton will be working with Chris and Utsav on mechatronics related activities on an artificial hand. We look forward to his accomplishments.
Zach is a material science student who will be researching additive manufactring (3D printing) of βTCP for biomedical scaffold fabrication. We look forward to his accomplishments.
Saul will be working with Chris and Utsav on mechatronics and more specifically on software development related to Human Robot Interaction employing an artificial hand. We look forward to his accomplishments.
S. N. Khan and P. S. Shiakolas, Finite Element Analysis of Descemet’s Stripping Automated Endothelial Keratoplasty (DSAEK) Surgery Allograft to Predict Endothelial Cell Loss, Current Eye Research, Accepted February 2016, DOI: http://dx.doi.org/10.3109/02713683.2016.1151052.
S. N. Khan and P. S. Shiakolas, To Study the Effects of Intrastromal Corneal Ring Geometry and Surgical Conditions on the Postsurgical Outcomes through Finite Element Analysis, Journal of Mechanics in Medicine and Biology, April 5, 2016, DOI: http://dx.doi.org/10.1142/S0219519416501013.
Shahid succesfully defended his master’s thesis work on the development and characterization of the photopolymerization module of the multi-module 3D BioPrinter.
Congratulations and wishes for continued success!
Tushar succesfully defended his master’s thesis on additive manufacturing methodologies for multiprocess material scenarios. Tushar decided to continue his studies towards a doctoral degree at UTA on the same subject.
Congratulations and we look forward to your continue success and contributions to the field of additive manufacturing aka 3D Printing!
Wishes for continued success!
The presenters included Dr. Shiakolas, Christopher Abrego, Prashanth Ravi and Hasah Abu.
Congratulations to all and wishes for continued success!
The conference papers presented and in the proceedings are the following:
S. N. Khan and P. S. Shiakolas, To Understand Myopic Alleviation by Conducting Finite Element Structural Analysis of the Cornea with an Intrastromal Corneal Ring Implant, ASME IMECE2015-51515, Houston, TX, USA
P. Ravi, P. S. Shiakolas, J. Oberg, A. Batra, and S. Faizee, On the Development of a Modular 3D BioPrinter for Research in Biomedical Device Fabrication, ASME IMECE2015-51555, Houston, TX, USA
P. Ravi, P.S. Shiakolas, T. Welch, T. Saini, K. Guleserian, and A. Batra, On the Capabilities of a Multi-modality 3D BioPrinter for Customized Biomedical Devices. ASME IMECE2015-52204, Houston, TX, USA
Md A. Hasan and P. S. Shiakolas, 3D Finite Element Stress Analysis of an Implant Supported Overdenture Under Bruxism and Lingualized Loading Conditions ASME IMECE2015-51688, Houston, TX, USA
Md A. Hasan, Effects of lingualized and linear occlusion schemes on the stress distribution of an implant supported overdenture using finite element analysis, ASME IMECE2015-52265, Nov. 13-19, Houston, TX, USA
(P.S. Shiakolas could not be listed as co-author due to the limitation on the number of papers one could be listed as co-author)
C. E. Abrego, P. S. Shiakolas and M. R. Sobhy, Developing an educational and research human robot interaction environment for a mechanical finger/hand, ASME IMECE2015-52305, Houston, TX, USA
C. E. Abrego and P. S.Shiakolas, Augmenting an Educational and Research Human Robot Interaction Environment with a Multi Obstacle Avoidance Algorithm, ASME IMECE2015-50969, Houston, TX, USA
Utsav, Samson, Divya, Mayankkumar, and Apoorv. We are looking forward to their accomplishments.